What did you do to your stang today?

[cLockWise]

H&R SS or Eibach Pro-Kit in my book. Both go great and give a perfect drop with no isos. Any lower, and I highly recommend MM coilovers.

Thanks for the input.. I'll have to look into the H&R SS kit since its been recommended twice now.. I need to see your car in person soon Barry so I can take a look at it..

[95V6]

Thanks for the input.. I'll have to look into the H&R SS kit since its been recommended twice now.. I need to see your car in person soon Barry so I can take a look at it..

Yeah, it will be out eventually. But no time soon.

[cLockWise]

I got mine out today. I took it for a small drive. I'm going to wash it, clay bar it, wash it again, then give it a really nice wax job. Try to get it looking nice. Then I'm going to try and clean the engine bay this year, its due for a cleaning.. Let me know when you get yours out this spring, I'd like to stop out and see it in person. Plus it'll give me an idea what those springs are looking like for when I goto order myself some!

[95V6]

Yeah. No problem.

[cLockWise]

What are your plans for the car this year? Do you ever go up to the Wexford meets? My girlfriend said its supposed to be really nice so I think were heading up there this year. Plus they have one down at the Pittsburgh Mills, so I'll probably hit that one up too.. I went to the one in Meadowlands on Racetrack Road (McDonalds) a few times last year with a few of my friends.. Some pretty nice older cars show up there, definitely a nice time. Any of you guys interested in coming this year, I'll post up some dates of it, so everyone knows

[95V6]

Yeah maybe. I'm kind of getting away from the show car scene. lol

[cLockWise]

You said you were gonna autocross yours right? I think you mentioned something about that earlier back, I cant' remember though.. I'll keep this one in show quality, well the best I can at least. I still like to drive it. I'll just get it repainted one day when it looks like shit that's all lol.

[95V6]

Yeah that's the plan.

[cLockWise]

Where's the closest track around here?

[95V6]

I guess it would be Pittsburgh Internatonal raceway complex formally Beaver run.

[PaxtonShelby]

Picking up the new GT tomorrow morning. The house will be spotless before then, because I'm sure I won't be able to sleep. :hyper::hyper::hyper:

[travj31]

if you get done cleaning at your place and still have some nervous energy, i have plenty of stuff i can have you do! good luck with the pickup, make sure you post pics!

[Darren]

yes sir you better post pics :pepper:

[street591]

Picking up the new GT tomorrow morning. The house will be spotless before then, because I'm sure I won't be able to sleep. :hyper::hyper::hyper:

I have a feeling in might be a bit of a garage ornament for awhile. :D

[PaxtonShelby]

I have a feeling in might be a bit of a garage ornament for awhile. :D

At least until I get a few coats of wax on her!

[White5.0]

Picking up the new GT tomorrow morning. The house will be spotless before then, because I'm sure I won't be able to sleep. :hyper::hyper::hyper:

congrats! I took mine out for the first time in a few weeks it feels great. You'll love it!

[95V6]

Picking up the new GT tomorrow morning. The house will be spotless before then, because I'm sure I won't be able to sleep. :hyper::hyper::hyper:

Finally!

[mineralrob]

Installed some tinted taillights and i drove it to work. Im not 100% sold on the tinted taillights though.. If someones interested in them pm me as ill probaly sell them :pinkthumb:

[cLockWise]

Installed some tinted taillights and i drove it to work. Im not 100% sold on the tinted taillights though.. If someones interested in them pm me as ill probaly sell them :pinkthumb:

Pics? I just put mine on yesterday. I like them!

Sent from my ADR6425LVW using Tapatalk 2

[mineralrob]

Im actually at work now. ill post a couple of pics later. Ive bounced back in forth between tinted and stock several times. I might keep them on for a lil bit but we'll see lol.

[Steve-0]

I also have two sets of tail lights, one tinted, the other not. You can get em cheap enough so might as well have both right? I think I only paid $40 for my non tinted set that are in perfect shape. :awsome:

[95V6]

Stay stock IMO.

[speedracer]

I started it.

[PaxtonShelby]

Brought her home from the dealer! Woooooo Hooooooo!

[Pure Stock]

Brought her home from the dealer! Woooooo Hooooooo!

How many miles on it as delivered?

[03 OW SVT]

Brought her home from the dealer! Woooooo Hooooooo!

Congrats Ron, I see in your Sig. it was born/built on my birthday, I think the least you can do is let me drive it. LOL

[yeahloh95]

installed battle boxes in my coupe

[PaxtonShelby]

How many miles on it as delivered?

6 miles were on it when I picked it up. Apparently these cars are transported from the factory in a "shipping mode" so they can only be moved around and not beat on by the transport drivers. So the dealers have to take the car out of shipping mode and drive it a few miles for full power to be allowed.

[PaxtonShelby]

Congrats Ron, I see in your Sig. it was born/built on my birthday, I think the least you can do is let me drive it. LOL

Only problem with that Kevin is that you will then have to go buy a car with Recaros. They are awesome!!

[White5.0]

6 miles were on it when I picked it up. Apparently these cars are transported from the factory in a "shipping mode" so they can only be moved around and not beat on by the transport drivers. So the dealers have to take the car out of shipping mode and drive it a few miles for full power to be allowed.


I don't think that's true. I was there when my '13 was taken off of the truck. Nobody drove it but me. My car had 4 miles on it. They drive each car a few miles at the factory to make sure there are no issues.

Now they did have to take the car and put inspection stickers on it, but it was never taken out of the dealer lot and driven. Maybe they changed it then?

O Well. Either way I'm waiting to see pics of your '14!

[Pure Stock]

installed battle boxes in my coupe

Nice!! Any pics Troy?

[Darren]

Congrats man! That would be a dream of mine to have a Mustang that new

[John4cam]

Congrats Ron! That washing machine paid off...

[PaxtonShelby]

Just going on what the dealer told me. He is a friend and wouldn't have any reason to tell me something that wasn't true.

I will post pics when I figure out how to do it!

[Silverhatch]

Have my 8.8 halfway in, installed my carb and hat, ordered more parts!

[speedracer]

I have the wheels and tires back on

[cLockWise]

Drove mine back home from Butler after spending some time with the girlfriend.. Was nice to have it out and driving it some!

[yeahloh95]

Nice!! Any pics Troy?

I will post pics when I figure out how to do it!

[White5.0]

Installed a barton 2 post bracket on my '13 today. Can definitely notice a difference, great part.

[Dan B.]

22750

Had to put the stock springs in the rear on Friday. Packed the car up for a road trip last weekend....with a full tank of gas and kids in the backseat, the 245 rear tires were rubbing the fender well lip. The entire car rides on springs from a 1998 Cobra. The ride was good and stance was right on....but practicality was less than ideal. So I threw it up on the rack and in about 20 minutes had the stockers back in.

[cLockWise]

Washed and waxed the car!

Sent from my ADR6425LVW using Tapatalk 2

[SlowSix]

put my summer wheels back on finally

http://i71.photobucket.com/albums/i156/illmatic016/Stang/IMG_20130410_133309_762_zpsb500f41f.jpg

http://i71.photobucket.com/albums/i156/illmatic016/Stang/IMG_20130410_150920_039_zpsb4a39cc1.jpg

[Cam99]

Washed and waxed the car!

Sent from my ADR6425LVW using Tapatalk 2

Looks awesome. What wax, or process did you use?

[Dan B.]

Looks awesome. What wax, or process did you use?

Getting my popcorn!!!

[1320goat]

Getting my popcorn!!!
Haha lmao

[cLockWise]

Looks awesome. What wax, or process did you use?

I didnt bother stripping it because it was pretty clean so I just washed it with armor all soap, cloth dried it.
Then I used Meguiars Gold Class wax and spent about 2 hours getting it completely waxed to get that gloss look. It came out good. Ive never used the gold class before but I think it went on extremely good and its easy to wipe off. It was dirt cheap at Walmart, I think 10.97?

Sent from my ADR6425LVW using Tapatalk 2

[Terminated]

Looks good but, like my car, needs lowered!

[cLockWise]

Looks good but, like my car, needs lowered!

Yeah I know haha. I have new wheels so it will help a little bit compared to the eye sore it is now. Next year I'll buy some suspension stuff. I'm about maxed out for the year. I'll lower it down to about Bullitt height.

Sent from my ADR6425LVW using Tapatalk 2

[Silverhatch]

My turbo wrap showed today!

[Monkeygrits]

Finally lowered it and installed the new lower control arms. Much better. Pulls so smooth. It's about an inch lower. Now hopefully I can get away with an alignment without cc plates.
22767

[95V6]

Looks good.

[SlowSix]

Finally lowered it and installed the new lower control arms. Much better. Pulls so smooth. It's about an inch lower. Now hopefully I can get away with an alignment without cc plates.
22767

glad those springs worked out for you.

and you should be okay without the CC plates. I'm about 1.5" lower and I'm still okay

[1320goat]

Finally lowered it and installed the new lower control arms. Much better. Pulls so smooth. It's about an inch lower. Now hopefully I can get away with an alignment without cc plates.
22767
Car looks good..how do you like those kdw's?

[no1sirbutler]

glad those springs worked out for you.

and you should be okay without the CC plates. I'm about 1.5" lower and I'm still okay

Yep he's right......mine aligns perfectly in specs and I don't have them......keep in mind Saleens are lowered from factory and they don't have them either. You will just have to drill out the rivets that hold them in place. The rivets are used for assembly line only and can be removed. Gives you a decent amount of travel once you do.

[Monkeygrits]

glad those springs worked out for you.

and you should be okay without the CC plates. I'm about 1.5" lower and I'm still okay

I hope so. Thanks again!!


Car looks good..how do you like those kdw's?

I really like them. No issues yet. Not sure about wet traction but dry traction seems good. I get more comments at cruises about the tread pattern than anything else on the car. :D

[Monkeygrits]

Yep he's right......mine aligns perfectly in specs and I don't have them......keep in mind Saleens are lowered from factory and they don't have them either. You will just have to drill out the rivets that hold them in place. The rivets are used for assembly line only and can be removed. Gives you a decent amount of travel once you do.

Do you have a pic of the rivet that needs drilled? I'll tell them at the ford dealer tomorrow to remove them if they need to.
Edit: I'll look in the morning. I'm sure the ford dealership will know to remove them. Thanks for the tip.

[Ares]

New battery, oil changed, burnt some rust off the brakes. Tried to polish the wheels...failed. Think they need cleaned up and then polished. As some dumb ass left them on the car all winter. Ah well another day for that. Ready to beat the hell out of it this weekend.

[Silverhatch]

Wrapped my headers and installed them, my offset lowers came ups as well.

[Dan B.]

Ready to beat the hell out of it this weekend.

Rock on!!! :goodidea:

[blzim21]

Just going on what the dealer told me. He is a friend and wouldn't have any reason to tell me something that wasn't true.

I will post pics when I figure out how to do it!



I cant wait to see pictures of you mustang!

[PaxtonShelby]

Dan B started a thread for me since I'm too much of a dumbass to post pics!

[blzim21]

well I have to go see it

[Monkeygrits]

Washed my car for the first time this year using the new chemical guys glossworkz and the double bucket/grit guards I picked up. What a difference. The car looks like I just waxed it. Great products. I also picked up a fire hose nozzle from Lowes and some chemical guys microfiber towels which I used to dry it.. I'll never go back.

http://img.tapatalk.com/d/13/04/15/azebaby2.jpg

[cLockWise]

Washed my car for the first time this year using the new chemical guys glossworkz and the double bucket/grit guards I picked up. What a difference. The car looks like I just waxed it. Great products. I also picked up a fire hose nozzle from Lowes and some chemical guys microfiber towels which I used to dry it.. I'll never go back.

http://lh4.ggpht.com/-GHc8tmujDfw/UWsA8e5zomI/AAAAAAAAAK4/NmCejNVgU8E/s640/IMG_20130414_144840_786.jpg

Looks awesome man! Where did you buy all the stuff at?

Sent from my ADR6425LVW using Tapatalk 2

[Monkeygrits]

Shopped around online. I got all of the stuff I used today from autoality and amazon. I also used a lambs wool mitt I got off of Amazon from meguires

[vitaleffects626]

Cut a big hole in engine bay

[Silverhatch]

Had Silvernotch come over to pick up a swaybar, installed the driveshaft, welded on my coilover brackets, got em painted.

[silvernotch]

struts,c/c plates,swaybar bushings,end links and started building a p/s hose. I'M TIRED!!

[vitaleffects626]

Sn building a ps line meaning going braided?? If so talk to venom he made them before I'm going to have him make mine when I'm ready

[Silverhatch]

Got the coilovers bolted back on. Productive weekend.

[95V6]

All four corners are broken down. All calipers are repaired and drying. Wire brushed everything and I'm going to paint the wells flat black. New rotors are ready to go in.

[Mark Aubele]

Installed custom Lunati cam in the shortblock, oil pan, and timing cover. Cleaned heads. Waiting on my Yella Terra rockers to get here so I can order pushrods and get this thing running so I can go race it.

[Sonic03snake]

Just drove and beat mine for the last 2 days, felt great to just turn the key and go, LOL.

[Wolfpack Speed]

^^^^^^^this

[venom]

Cut a big hole in engine bay

I can post pictures of this!

:hyper:

[Darren]

Washed my car for the first time this year using the new chemical guys glossworkz and the double bucket/grit guards I picked up. What a difference. The car looks like I just waxed it. Great products. I also picked up a fire hose nozzle from Lowes and some chemical guys microfiber towels which I used to dry it.. I'll never go back.

http://img.tapatalk.com/d/13/04/15/azebaby2.jpg
I do love that Mach 1! Makes me miss my 04 Comp Orange Mach :(

[PaxtonShelby]

Just drove and beat mine for the last 2 days, felt great to just turn the key and go, LOL.

Amen to that!!!

[GOT SVT]

drove mine yesterday to the autox at north park

first time out in 2013

[03 OW SVT]

drove mine yesterday to the autox at north park

first time out in 2013
And did you autoX it?

[JOlbert]

Drove mine to the post office today & wondered why I haven't listed it for sale. Local dealer is making it real hard not to buy the 2013 I looked at on Saturday

[sutyak]

Some drivability/low-RPM tuning with SCT Pro Racer Package. Who would have thought WOT was the easy part?

[GOT SVT]

And did you autoX it?

nope, didn't have the time to stay for the whole day. wish i could of because it was set up nice for mustangs

just trying to get some miles on it at this point

[no1sirbutler]

Actually out in line for the first time this season blowing the dust off.....it's filthy and needs a day of detailing


Sent from my iPhone using Tapatalk

[Monkeygrits]

Painted my calipers with a Dupli-Color silver caliper paint kit. Painted the rotors and a few other things with black Rustoleum grill paint. Best brush on high temp paint I've found. Drys satin black.
http://img.tapatalk.com/d/13/04/26/6ypynebu.jpg

[blzim21]

went for nice drive with my neighbor who just got a 06 gt today. His is the one in the back 22877

[no1sirbutler]

Put my new Borla exhaust on last night. Sounds amazing! Now I just need to finish going over the suspension and get it back on the ground so I can drive it.

[Mark Aubele]

Wired up 3G alt in the '84, wired up the newer style starter, cleaned up some ludicrously ghetto wiring, today lash valves and maybe get the seat mounts welded in so I can race this thing someday.

[bert9930]

Not mine but put a xpipe on my buddies cobra

http://img.tapatalk.com/d/13/05/04/rahebetu.jpghttp://img.tapatalk.com/d/13/05/04/ramusa9e.jpghttp://img.tapatalk.com/d/13/05/04/e7yseqen.jpg

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

[cLockWise]

Not mine but put a xpipe on my buddies cobra

http://img.tapatalk.com/d/13/05/04/rahebetu.jpghttp://img.tapatalk.com/d/13/05/04/ramusa9e.jpghttp://img.tapatalk.com/d/13/05/04/e7yseqen.jpg

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Love the last pic!

[Silverhatch]

Plumbed my turbo drain and feed line. Fuel lines connections are next.

[Mark Aubele]

Finally got the car running and broke in the archaic SCCA mandated solid flat tappet cam. 241@.050 on a 108 LSA sounds pretty nasty in a 9 to 1 302.

[fox fan]

Put on a set of Double adjustable Team Z upper control arms this morning.

[Mark Aubele]

Just got done changing valve springs with the engine in the car after breaking in the cam on some worn out stockers. Relashing valves. I hate solid flat tappets with every inch of my soul

[pwtmxracing]

I tinted my wife's windows in her 99 gt

[Silverhatch]

22982 Installed my downpipe.

[Terminated]

Changed the oil yesterday. Taking a trip up to Canadia tomorrow, gonna get out and stretch her legs a little bit.

[95V6]

Your driving the Cobra to Canada?

[Terminated]

Your driving the Cobra to Canada?

Hell yeah, this car has seen more states that most people have. I usually take it for at least one or two road trips every summer

[cLockWise]

Hell yeah, this car has seen more states that most people have. I usually take it for at least one or two road trips every summer

How do you keep it from getting all chipped up??

Sent from my ADR6425LVW using Tapatalk 2

[1320goat]

Just ordered a bunch of goodies from our site sponsor revanracing. I have been sending Van way too much money over the past year.

[cLockWise]

Just ordered a bunch of goodies from our site sponsor revanracing. I have been sending Van way too much money over the past year.

Nice what kind of goodies did ya get? Interior, Exterior, Performance?

[1320goat]

Nice what kind of goodies did ya get? Interior, Exterior, Performance?

Mostly performance including a lot of suspension parts. Eibach pro, double adjustable panhard, some relo brackets for when I run wider wheels and tires. And a few other things to keep me busy for a few days.

[Terminated]

How do you keep it from getting all chipped up??

Sent from my ADR6425LVW using Tapatalk 2

Touch up paint! Someday this car will be gone, I would much rather remember seeing the country in it than washing it and parking it in the garage.

[Darren]

Touch up paint! Someday this car will be gone, I would much rather remember seeing the country in it than washing it and parking it in the garage.

amen to that

[95V6]

Touch up paint! Someday this car will be gone, I would much rather remember seeing the country in it than washing it and parking it in the garage.

I sit in mine in the garage and make car noises. Vroom Vroom.

[no1sirbutler]

Touch up paint! Someday this car will be gone, I would much rather remember seeing the country in it than washing it and parking it in the garage.

I slap stickers all over mine and race around to country trying to find check points all in the hopes to raise money for a charity.

[Terminated]

I slap stickers all over mine and race around to country trying to find check points all in the hopes to raise money for a charity.

That's whats up! I bought my car with daily driver miles and wear on it so I didn't have to feel bad driving it. Hell, my two month old paint on my front bumper already has a few rock chips in it, but nothing 15 minutes with a touchup pen and clear coat can't fix!

Edit: On a side note I just filled up here in Milton, Ontario at $1.429/liter for 94 octane, or roughly $5.25/gallon!

[no1sirbutler]

That's whats up! I bought my car with daily driver miles and wear on it so I didn't have to feel bad driving it. Hell, my two month old paint on my front bumper already has a few rock chips in it, but nothing 15 minutes with a touchup pen and clear coat can't fix!

Edit: On a side note I just filled up here in Milton, Ontario at $1.429/liter for 94 octane, or roughly $5.25/gallon!

Mine was 4 yrs old when I bought it and it had less than 14K on it.....now it has just shy of 73K lol

[cLockWise]

That's whats up! I bought my car with daily driver miles and wear on it so I didn't have to feel bad driving it. Hell, my two month old paint on my front bumper already has a few rock chips in it, but nothing 15 minutes with a touchup pen and clear coat can't fix!

Edit: On a side note I just filled up here in Milton, Ontario at $1.429/liter for 94 octane, or roughly $5.25/gallon!

5.25 a gallon. Holy shit. That sucks!! What kind of sales exactly do you do Dan? If you don't mind me asking? Also, any recommendations of places to go in Indiana. I believe I'm going to be in Indianapolis and also in Marion, Indiana next month. I'll also be in teays valley, wv

Sent from my ADR6425LVW using Tapatalk 2

[Silverhatch]

ignition came in today!

[venom]

Logged another 14.3 miles on the new motor. Small steps.

[Darren]

my genuine boss 302 shift knob and alcatara shift boot came in today!

[Terminated]

5.25 a gallon. Holy shit. That sucks!! What kind of sales exactly do you do Dan? If you don't mind me asking? Also, any recommendations of places to go in Indiana. I believe I'm going to be in Indianapolis and also in Marion, Indiana next month. I'll also be in teays valley, wv

Sent from my ADR6425LVW using Tapatalk 2

I sell underground pipe inspection software, but all of my road travel is for on-site trainings. I am up here with a sales partner helping them out with our laser-profiling software.

[cLockWise]

I sell underground pipe inspection software, but all of my road travel is for on-site trainings. I am up here with a sales partner helping them out with our laser-profiling software.

That's pretty cool man! I'm excited to start traveling a bit. I've been working every other day, 12 hours a day so it's going to be nice to switch positions into a more uniform schedule working grouped days. Plus it will be nice to get out to different places.

Sent from my ADR6425LVW using Tapatalk 2

[1320goat]

Just ordered Baer 6 piston brake upgrade for the gt500. The stock 4 piston brembo calipers and rotors will be for sale soon.

[cLockWise]

I got the wheels out and put a coating of the finishkare 1000 paste on my rims. One more coating then a nice glaze and I'll have them on the car.

Sent from my ADR6425LVW using Tapatalk 2

[sutyak]

On my turbo Focus I finally started to tear down my first motor that was puking oil out the exhaust manifold. It's been on the engine stand since 2009.
Head gasket does look damaged, so I'm expecting to find crispy rings when I pull the rotating parts.
On the shelf are forged pistons, rods, Cosworth flywheel, SPEC stage 4 clutch, ARP studs, etc. Need to get a limited slip or I'll be the one-wheel-peel king.

[bert9930]

http://img.tapatalk.com/d/13/05/15/ne3evyne.jpg

Teardown started for new pads, rotors, intercooler pump and tank. Plus going to paint and clean some stuff up.

Sent from my SAMSUNG-galaxy 4 using Tapatalk 2

[95V6]

I got the wheels out and put a coating of the finishkare 1000 paste on my rims. One more coating then a nice glaze and I'll have them on the car.

Sent from my ADR6425LVW using Tapatalk 2

Looks like some nice meats! What wheels?

[cLockWise]

Looks like some nice meats! What wheels?

They are NT555R's. I thought I only bought the regular 555s but they sent me the R. Doesn't matter though lol.

Sent from my ADR6425LVW using Tapatalk 2

[bert9930]

Parts sandblasted and primed. Ready for paint.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

[Terminated]

Is that the stock heat exchanger?

[bert9930]

Is that the stock heat exchanger?

Yeah

[PaxtonShelby]

Washed up the GT yesterday and took the gang out to eat. Came out and there were tons of tiny drops of sh!t from a nearby tree all over the trunk lid, rear bumper, tops of quarters and doors. WTF! So last night I got out the Finish First cleaner then hit it with another coat of Four Star. Now all is well.

[GOT SVT]

finally got around to putting on some of the parts i have been accumulating, lots more to do though

fuse box cover
battery cover
master cylinder cover
cooltech llc sound tube delete
swapped the blue coil covers for gray ones

final result




http://i783.photobucket.com/albums/yy112/GOTSVT/2013%20Boss%20302/20130516_213024_zps14534c9a.jpg (http://s783.photobucket.com/user/GOTSVT/media/2013%20Boss%20302/20130516_213024_zps14534c9a.jpg.html)

[cLockWise]

Second coating of wheel sealant on. I'll have these on the car next week!

Sent from my ADR6425LVW using Tapatalk 2

[Terminated]

Yeah

If you're already that far into taking it out, why not just upgrade it?

[bert9930]

If you're already that far into taking it out, why not just upgrade it?

I was going to but Its needs brakes rotors and tires. So that threw the budget out the window

http://img.tapatalk.com/d/13/05/18/na7edebu.jpg

True forged ic tank in.

http://img.tapatalk.com/d/13/05/18/a9ynyjyt.jpg

Coil covers painted

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

[03 OW SVT]

finally got around to putting on some of the parts i have been accumulating, lots more to do though

fuse box cover
battery cover
master cylinder cover
cooltech llc sound tube delete
swapped the blue coil covers for gray ones

final result





Looks good PJ, but I think I like the blue coil covers better.

[fox fan]

23060New wheels and power steering rack.

[PaxtonShelby]

Drove it to Scallys driving range and hit a few buckets. What a gorgeous day!

On my way out of the driving range a girl saw me getting into the GT and said she really liked it. And...then she said she is picking up her own Sterling Gray Metallic Mustang this week at Woltz and Wind Ford. She was really excited about it. And quite cute - long dark hair - about 5'6" - and very fit and toned. Anyone on here know her?

[Dan B.]

Not a Stang......but.....preppeing the Ranger for the 387W. Had a leaky axle seal and diff. So I tore it all apart on Friday, installed new seals and got it all ready to go back together. Will be pulling the shortblock soon and doing some engine bay touch ups. Also going to ditch the old school slapper bars and start fabbing a set of CalTrac style traction bars.

[frankstang]

3G upgrade. Gonna do a Mark VIII electric fan next.

http://i82.photobucket.com/albums/j257/frankstang/DSCF2193_zpsa85a45fc.jpg (http://s82.photobucket.com/user/frankstang/media/DSCF2193_zpsa85a45fc.jpg.html)

[Darren]

Drove it to Scallys driving range and hit a few buckets. What a gorgeous day!

On my way out of the driving range a girl saw me getting into the GT and said she really liked it. And...then she said she is picking up her own Sterling Gray Metallic Mustang this week at Woltz and Wind Ford. She was really excited about it. And quite cute - long dark hair - about 5'6" - and very fit and toned. Anyone on here know her?

where are women like this??? Why cant I meet a girl in Moon who drives a car like mine (and yours). Thats my dream girl. lol

[PaxtonShelby]

She was cute - I should have told her my buddy Darren wanted her phone number!

[Monkeygrits]

Day two of paint correction. First go at it. Just got it sealed. Wax tomorrow. It's amazing how it came out. Also installed true forged side scoop inserts. Getting the front bumper resprayed next week. No more chips:thumbup:
23039
23040
23041

[speedracer]

Did my first alternator... bastards should be shot for putting it where they did

[cLockWise]

Day two of paint correction. First go at it. Just got it sealed. Wax tomorrow. It's amazing how it came out. Also installed true forged side scoop inserts. Getting the front bumper resprayed next week. No more chips:thumbup:
23039
23040
23041

That looks good. I love those true forged side scoops.
I'd love to have some on mine


Sent from my ADR6425LVW using Tapatalk 2

[yeahloh95]

just took the rest of the stock fuel lines off coupe and started on thru floor connectors

[95V6]

My UPR O/R X pipe came in today.

[ModularMike]

Not a stang but put my new chick stick in.

23042

[cLockWise]

My UPR O/R X pipe came in today.

Stop talking about it and lets get it on the car! :) They delivered that pretty quickly actually! I bet your excited. What exhaust did you go with, Flowmaster?

[95V6]

Yeah I was shocked. I think I ordered it Friday. I think I might keep what ever chambered muffler is on the car. Just for the time being.

[Terminated]

Washed and ready for Brookline car show.

23051

[Mark Aubele]

Dragged the AS car over to Stick947's so we (he) could weld some seat mounts in, then we put it on the scales to get the cross weights right. Never would've thought in my wildest dreams a gutted '84 Mustang would weigh this much, but it does. Cage must weigh 400 lbs. 227lbs. over minimum weight for the class. ****. Weights with me in it (~230lbs)

http://i1119.photobucket.com/albums/k640/Hillclimb95/128618EB-BEB7-4F14-BAF9-82AEA254E5D7-12452-0000125A9FCA085C_zps970548ad.jpg (http://s1119.photobucket.com/user/Hillclimb95/media/128618EB-BEB7-4F14-BAF9-82AEA254E5D7-12452-0000125A9FCA085C_zps970548ad.jpg.html)

http://i1119.photobucket.com/albums/k640/Hillclimb95/6D28E6AB-0B2B-471A-A360-50F897B81A1C-12452-0000125AA3A06C83_zpsdbe95843.jpg (http://s1119.photobucket.com/user/Hillclimb95/media/6D28E6AB-0B2B-471A-A360-50F897B81A1C-12452-0000125AA3A06C83_zpsdbe95843.jpg.html)

[cLockWise]

Yeah I was shocked. I think I ordered it Friday. I think I might keep what ever chambered muffler is on the car. Just for the time being.

Yeah? Your not sure what's on there. I'll have to drive over and take a look and see and listen to it. Maybe I'll be able to get an idea what you have lol.


Washed and ready for Brookline car show.

23051

Looks good Dan. When did you get those wheels?

Sent from my ADR6425LVW using Tapatalk 2

[95V6]

He had them on last summer at the Moon Park show I think.

[cLockWise]

I'm going to hopefully put mine on Friday. We'll see though I dunno what the weather looks like the rest of the week. I want to get my car washed up and then throw them on once I do.

[Terminated]

^^^ Yea I got them last summer.

[Monkeygrits]

That looks good. I love those true forged side scoops.
I'd love to have some on mine


Sent from my ADR6425LVW using Tapatalk 2

They were pricey but we'll worth it for a nice piece of billet aluminum. I really wanted fore inserts but they stopped making them:mad:

[cLockWise]

They were pricey but we'll worth it for a nice piece of billet aluminum. I really wanted fore inserts but they stopped making them:mad:

Which ones are the fore inserts??

Sent from my ADR6425LVW using Tapatalk 2

[Darren]

Well the first picture is what my garage looks like (fixed up my front old dirty nasty garage) when i had my comp orange mach 1. Looks awesome still!
23053
the next pictures are my new window tint. 5% rear, 20% on sides.
23054
23055

[03 OW SVT]

Car looks great Darren.

[PaxtonShelby]

Lookin good buddy! SMG in the sunlight...SHWING!!!

[95V6]

That does look good, nice Stang.

[Darren]

Thanks everyone! I think ive decided to take the white stripes off, in favor of either black ones or just a more clean look.

[95V6]

I said it before, I like it.

[PaxtonShelby]

There is a guy with a screen name of Joey8 on themustangsource with OTT black stripes. Car is SMG and really looks good. Check it out.

[1320goat]

Baer extremes came in today..they look awesome.http://img.tapatalk.com/d/13/05/24/metuhyga.jpg

[95V6]

Nice!

[Darren]

love me som' big brakes!

[1320goat]

love me som' big brakes!

Did you ever put those brembos on?

[Darren]

actually not yet. Ive been collecting parts over time and want to do everything at once. Work and school has been killer on time. Gonna take a weekned here soon off to do all of this:
Brembos front and powdercoat the rear black, Boss brake lines, JLT oil separator with a custom bracket to mount to fuse bracket, Boss coil covers, Boss 302 Shift knob and GT500 boot, remove white stripes and put on rear blackout panel, black 5.0 badges, custom hood stripe and hood accents :yes:, Boss 302 oil cooler, paint rear faux cap black, and Boss 302 side exhaust.
Once that is all done, time for CAI and tune from wolfpack!

[PaxtonShelby]

Dang Darren - that's quite a list!!!

[Darren]

I know it is! Plus i'm planning on picking up a new shifter, shifter bracket, and replacing all the fluids with royal purple.
So in other words, i'm going to have my hands full for a weekend! and lots of beer :laughing:

[PaxtonShelby]

Darren - After you have those goodies installed we'll have to get together some sunny day for a SMG photoshoot...which will probably intensify my urge to start modding after seeing/hearing your car.

[Darren]

Darren - After you have those goodies installed we'll have to get together some sunny day for a SMG photoshoot...which will probably intensify my urge to start modding after seeing/hearing your car.

Paxton- Sounds like a plan to me!
The mod bug bit me bad on this car... haha

[Darren]

I was even thinking of putting my fogs behind the grill too, its fairly simple to do.
23064

[cLockWise]

What shifter are you going with Darren??

[Darren]

my shifter just feels sloppy to me.
I was thinking this and the matching bracket. I've heard alot of good things about it, normally cheaper prices
scare me off but the reviews are really good.

heres the link http://www.americanmuscle.com/short-shifter-1112.html

[Dan B.]

I was even thinking of putting my fogs behind the grill too, its fairly simple to do.
23064

I love this look!

[bert9930]

http://img.tapatalk.com/d/13/05/26/ytejubup.jpg

Rear calipers painted and new pads and rotors installed.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

[Mark Aubele]

Torqueboxer came over last night, and we were finally able to get the car to idle at 1200. Car wanted a ton of initial timing or it refused to idle without the curb idle on the Holley being cranked until it was in the primaries, so we took the MSD distributor apart and locked out the timing at 32 degrees. Made a few adjustments until we got it to idle around 14.5 to 1 AFR.

Ended up going to a Porsche club autocross today to work out some bugs, made five runs, car went a lot faster than I thought with some fuel starvation under braking and in corners (need angled floats and jet extensions), and some unknown origin R6s. After 5 runs one of the adjusting nuts on the rockers stripped, so I had to load the car up and call it a day.

[cLockWise]

Waxed up and got the new wheels and tires on! Got to try out the new craftsman impact wrench. Worked great. Just need to order some lugnuts now lol. The stockers look terrible.

Sent from my ADR6425LVW using Tapatalk 2

[Silverhatch]

Fixed the toe in on the lightning and installed both hellwig sway bars. wooooo!

[Ares]

Finally got some time spent polishing the nightmare known as my wheels done today. Started some of yesterday at track since we got no racing in. Came out much better than what I started with. Not perfect but for now they no longer look like crap. Lesson learned in not putting the stockers on the car when it sits outside all winter.

[95V6]

Bought a ABC shaved 03-04 Cobra rear spoiler today.

[95V6]

Waxed up and got the new wheels and tires on! Got to try out the new craftsman impact wrench. Worked great. Just need to order some lugnuts now lol. The stockers look terrible.

Sent from my ADR6425LVW using Tapatalk 2

Looks good, now lower that bitch.

[speedracer]

http://img.tapatalk.com/d/13/05/26/ytejubup.jpg

Rear calipers painted and new pads and rotors installed.



Torque your axle nut to 250ftlbs... stupid things work loose

[Darren]

Looks good, now lower that bitch.

Agreed. Springs can make all the difference :goodidea:

[cLockWise]

Looks good, now lower that bitch.


Agreed. Springs can make all the difference :goodidea:

Working on it guys. Still deciding what kind of setup I'm going to run once I lower it... Been looking at different peoples setups, what works good, etc.. I'm not a very good suspension guru, so Its taking me a lot of time :(

[Darren]

just adding to my list of parts to swap/install once my garage is finally finished!!!

23102

[PaxtonShelby]

Oh snap! Does this mean you're considering red OTT stripes? Might be neat!

[Monkeygrits]

Going mad max style:D
23103

[Darren]

Oh snap! Does this mean you're considering red OTT stripes? Might be neat!
I might be ;) it's gonna be a surprise. I've been using my free time to clean/paint/waterproof/ and do flooring in my garage. Almost done with that so I can actually work on my car

[Darren]

Monkey, getting a new front bumper?

[Monkeygrits]

Oh i did a little paint correction on my dad's gtcs today as well.
23106
23107

[03 OW SVT]

Oh i did a little paint correction on my dad's gtcs today as well.
]
Those wheels look familiar. Looks good!

[Monkeygrits]

Monkey, getting a new front bumper?

No just getting mine repainted. Getting the plate holes filled and the chips fixed.


Those wheels look familiar. Looks good!

P

Yep they still look amaZing:D
..

[fox fan]

Made some progress on the car this weekend so far. Friday dropped the heads off at Evanuik Performance to get freshened up. Today stabbed a TFS stage 1 cam in, painted the short block, timing chain cover, and intake. Put on the swap oil pan pickup and timing chain cover. Started removing A/C components. I'll try and get up some pictures tomorrow. Hopefully get it inspected this week and start yanking the 4 cylinder finally.

[Mark Aubele]

Dynoed the AS car today. Stock shortblock, custom Lunati solid flat tappet 241/241@.050, 108LSA, .499 lift (class limit on valve lift), untouched GT40p heads (aftermarket springs and retainers, stock valves, stock valvejob, zero porting), untouched Performer RPM intake, box stock Holley 600 DP, 1 5/8 headers. Made 295@6300, pretty much held that power until I let off at 6600. Off the trailer made 275, we found ~15hp in timing changes (26*to 30*), and about 5hp or so in jetting changes. Thank you to Torqueboxer for all the help through 15 pulls of trying to sneak another couple hp out of it. Still think there is a bit more in it, AFR got rich after 5000, went from a nice 13.0 down to 12.3 at peak power.

Also tried removing the 14x3 ghetto paper filter to see if it picked up power, no discernible difference.

[Mark Aubele]

I know how much attention people get when they post pics of freshly washed cars on here, so here is the thoroughly molested original '84 GT350 after a bath with brake cleaner and Purple Power in judicious amounts to get rid of all the old sticker shit that was left after I peeled them off. Show car. It looks much, much worse in person.

http://i1119.photobucket.com/albums/k640/Hillclimb95/6E49ADDB-F29C-44A2-A4CA-DD83D92A40B1-5665-0000075E5FCE3497_zps42c9c27e.jpg (http://s1119.photobucket.com/user/Hillclimb95/media/6E49ADDB-F29C-44A2-A4CA-DD83D92A40B1-5665-0000075E5FCE3497_zps42c9c27e.jpg.html)

[speedracer]

Nice!

[blksunshine88]

What kind of car wash did u use Mark? :D

Sent from my SCH-I405 using Tapatalk 2

[blksunshine88]

U shining those tires or what? Lol

Sent from my SCH-I405 using Tapatalk 2

[Mark Aubele]

What kind of car wash did u use Mark? :D

Sent from my SCH-I405 using Tapatalk 2

A combo of brakekleen and purple power

[somethingclever]

Kerosene bath FTW.

Good power out of unported gt40's. nice. Where did it peak before the hold?

[PaceFever79]

Sad to see a solid looking 84 GT-350 sent to the AS games.

[Mark Aubele]

Kerosene bath FTW.

Good power out of unported gt40's. nice. Where did it peak before the hold?

The peak came at 6300, ran it out to 6600, not really much drop off. I have a dyno sheet from the third pull before we cleaned up the jetting (did not affect peak but improved under the curve), will post if up. I think we have more left if we can get the afr cleaned up after 5000, even when we were able to get it to maintain 13:1 throughout the pull, it dipped to 12.3 above 5000 to 6600. Prob leaving 10hp on the table. I was surprised how flat the torque curve was for how wild the cam is for a 9:1 302. Shitty heads and induction probably helped.

http://i1119.photobucket.com/albums/k640/Hillclimb95/694ADB92-BEBE-49DB-B60B-2B0EB13A77E6-5994-0000081A54547367_zpsd5e86e4f.jpg

[Mark Aubele]

Sad to see a solid looking 84 GT-350 sent to the AS games.

It is a sticker package dude, and it has been a racecar since the 90's.

[blksunshine88]

Awesome curves Mark, when u hitting up a race? I'd like to bring the family out and spectate

Sent from my SCH-I405 using Tapatalk 2

[PaceFever79]

It is a sticker package dude, and it has been a racecar since the 90's.

Okay, Sport. Btw, from what I have read, just shy of 400 HP at the flywheel is the benchmark for AS..... which should translate to about 340 WHP.... you have a ways to go.

[PaceFever79]

The car is actually a limited production 1984 1/2 Ford Mustang G.T. 350 20th Anniversary Edition. True the performance was the same as standard GTs, but it was more than just a stripe kit. To verify it's a real Anny look at the buck tag on the radiator support. It will say "ANN" if it's legit. It is a rare collectible Fox (not to be confused with valuable, or disposable!) it was 1 of 2604, 1 of 934, or 1 of 362 depending on engine. It's a sure bet less than 1/2 of those remain. And it makes me sad to ponder its fate since I have participated in AS and AI races. But it is yours to do with as you please. The dude abides.

20th Anniversary GT350 - 5,261 units
5.0L 5-speed convertibles (4V carb) - 587
5.0L AOD (automatic) convertibles (CFI) - 670
2.3L Turbo 5-speed convertibles (EFI) - 104
5.0L 5-speed hatchbacks (4V carb) - 2,604
5.0L AOD (automatic) hatchbacks (CFI) - 934
2.3L Turbo 5-speed hatchbacks (EFI) - 362

[blksunshine88]

"the dude abides" been a while Lebowski!
PS with Aubles Superior driving skills he wanted to make sure the competition had a chance

[Mark Aubele]

Okay, Sport. Btw, from what I have read, just shy of 400 HP at the flywheel is the benchmark for AS..... which should translate to about 340 WHP.... you have a ways to go.

Since you seem to be so knowledgable about the class, you should also know these guys have 15k+ in these motors. Ultra lightweight internals, neutral balanced crank, they typically run 15-20 more degrees of duration because they have the rotating assembly to support 7500 rpm (I obviously don't), valve job, better valves, Edelbrock has an AS legal head that guys see 40 hp gains from (from what I am told, doubt 40 considering it is basically a performer rpm head that flows a bit worse), etc.

I am using a stock shortblock, untouched heads, a cam custom ground so it will make the power exactly where it does so the motor will live, and a bunch of other used junk. The thing makes exactly what it should.

If I find the badge you are speaking of, I am going to post a video of me destroying it, because I could give a **** how rare the car is. Sport.

[PaceFever79]

Cool, I hope you put it in the wall!

[Mark Aubele]

Cool, I hope you put it in the wall!

Might just bring my bicycle with me and try to match some of your records Friday night before the hillclimb, I know I can get really close. Or I can just walk it.

[went9s]

I cant belive you ruined a limited production 1984 1/2 Ford Mustang G.T. 350 20th Anniversary Edition... I hope you go to hell. Its like putting pony wheels on a 79 pacecar omg

[blksunshine88]

What if they're white ponys?

[went9s]

death

[SAC81]

if i find the badge you are speaking of, i am going to post a video of me destroying it, because i could give a **** how rare the car is. Sport.

lmao

[SonofaBish]

YES - this is what i've been missing.... One guy, with probably the ugliest car ever put into production, bashing some other guys for racing his car as he pleases..... now we're back in business!

[went9s]

300 whp with stock 302 and a set of unported gt40p's is getting it done.

[blksunshine88]

Lmao!
Sent from my SCH-I405 using Tapatalk 2

[PaceFever79]

YES - this is what i've been missing.... One guy, with probably the ugliest car ever put into production, bashing some other guys for racing his car as he pleases..... now we're back in business!

F*ck you, I saw you tooling around Bridgewater like a grandpa in your POS

[PaxtonShelby]

From what Mark has said, this car is not a trailer queen. It wouldn't be worth it to restore it to factory condition. So why get upset that he is racing it? These GT350's will never be worth much unless they are in perfectly preserved original condition, and even then it is highly unlikely that they'll be worth more than a 2-year-old Toyota Camry. And sorry - hoping that someone puts a car into the wall is simply NOT cool. Period. I have met and received driving instruction from Mark and he's a good guy who knows what he is doing, and I wish him well with this car. Being competitive in a car with less power than the competition - and for a significantly smaller $$ investment - is very cool in my opinion.

[somethingclever]

F*ck you, I saw you tooling around Bridgewater like a grandpa in your POS



This made me LOL

[somethingclever]

I cant belive you ruined a limited production 1984 1/2 Ford Mustang G.T. 350 20th Anniversary Edition... I hope you go to hell. Its like putting pony wheels on a 79 pacecar omg


I see what you did here....LOL

[SonofaBish]

F*ck you, I saw you tooling around Bridgewater like a grandpa in your POS


haha.... OOOOOOOOOOOOOOK :rotflol:

[SAC81]

A guy actually wishing death or injury ("I HOPE YOU PUT IT INTO THE WALL!") on another guy because he's racing a modified mid-80s fox body....LMAO...only on a Pittsburgh area car forum.

[PaceFever79]

Look, as long as I have been on SCS, Mark has been a smug prick to me. Whatever, we are not friends, I don't care. But when he starts attacking me over my opinions about stuff, I'm going to fire back. Learn some humility. Just because rules change and cars get faster doesn't mean you are a better driver or know more about anything than the guys who came before you. Our lap times may not be as fast, but we were pushing what we had at the time to the edge of the envelope. In road racing, that meant going deep and fast enough into turns to make you wet your pants so we could carry more momentum. Today, it's a different game. But no more competitive. And I have you beat, because when I was club racing, most of my piers liked me. Guys like Mark Donohue were my idols.

As far as my being sad for the fate of a limited edition Anny Mustang, f*ck me, I thought this was a Mustang forum??? It's not like I protested, I just said it was sad. From there I knew you would come back with some sort of insult, I was just waiting to laugh out loud. And now your bully buddies are piling on. You don't even know your Ford history. The GT-350 was a pet project of Edsel Ford, because Mustang sales were slumping and all Ford cared about was Escorts, Tempos, and F150s. Edsel sent down the word that there was to be a limited edition 20th Anny Mustang and it would also give a nod to the original Shelby 350. When word trickled down through Ford that Edsel was still enthusiastic for performance Mustangs, it paved the way for more performance upgrades in 85, 86, 87, 89, 93, and gave berth to the modern pony car. Without that humble but sincere push by Edsel, the FWD Probe/Mustang could have been a reality.

I truly hate this Forum.... what a waste.

[blksunshine88]

Hmm lets see, if you think the guy is a prick (which I don't Mark and I help each other out the best we can) then why even respond to his post knowing you're not going to like his response?

[95V6]

http://youtu.be/5DmYLrxR0Y8

[PaceFever79]

Hmm lets see, if you think the guy is a prick (which I don't Mark and I help each other out the best we can) then why even respond to his post knowing you're not going to like his response?


I find that hard to believe, but maybe you guys have a thing.

Anyway, this isn't Dr Phil, so I'll just let it ride.

[blksunshine88]

Pretty sure you just called me a fag, I hope we never meet in person, may have to remove your pace car stickers with your face.

[blksunshine88]

Still never answered the question, why post about his post when you know you're not going to like the response, fishing for trouble??

[PaceFever79]

You know you just committed a crime?

[blksunshine88]

Nothing as bad as liking the 79 pace car so much to start trouble on here lol, threats are illegal, promises are not get over yourself,

Back to the original post, great job on the HP numbers Mark, can't wait to see it in action

Sent from my SCH-I405 using Tapatalk 2

[Mark Aubele]

Look, as long as I have been on SCS, Mark has been a smug prick to me. Whatever, we are not friends, I don't care. But when he starts attacking me over my opinions about stuff, I'm going to fire back. Learn some humility. Just because rules change and cars get faster doesn't mean you are a better driver or know more about anything than the guys who came before you. Our lap times may not be as fast, but we were pushing what we had at the time to the edge of the envelope. In road racing, that meant going deep and fast enough into turns to make you wet your pants so we could carry more momentum. Today, it's a different game. But no more competitive. And I have you beat, because when I was club racing, most of my piers liked me. Guys like Mark Donohue were my idols.

.

I have never been a smug prick to you. We both know how this all started, I practically gave you a bump steer kit, shipped it to you, then you complained about the condition. I offered to give you your 40 bucks back or whatever it was, and you declined. Not sure what you wanted.

Then somehow you stated that drag racing is harder on an engine than hill climbing is, and of course as usual you bragged about your years of experience, and that you never held the car WOT for as long as a typical 11 second run during a 2 minute long uphill run so of course no one else does. Of course I didn't agree and neither did anyone else because it made no sense.

Now you come in this thread and try to discredit me or what my car put down or whatever, like it put down any power anyway. I wasn't bragging, just showing what a simple low budget rules limited solid flat cammed engine can make. That's it.

You act as if everything you say is gospel because you did things before some others have. Well it isn't. If you say something stupid, especially when you are talking down on me, I am going to respond. That is how forums work.

Of course cars run faster times now, mostly due to hp and tire tech. I just suggested I would stomp you on my bicycle because you said you wanted me to hit a wall. I felt the response fair.

Me a dick? No one respects me? Come this weekend, or any event, I assure you my peers have respect for me as they supposedly did you(which I highly doubt). I have also met many members on here sold parts to, raced with, drank with, etc. I doubt you will find too many that would say I was a dick, except for went9s. Maybe a couple others. I just don't like you, has nothing to do with anyone else.

[03 OW SVT]

Your a dick! Lol, j/k Mark! I've met you twice and find you to be A-OK in my book. I know you are a driving mo-foe that's for sure.

[Terminated]

Lotta butthurtery on here... is that even a word??

[scott5]

any mustang in the late 70s and early 80s are thee ugliest mustangs ever made. They all should be gutted, caged, lsx swapped and raced. Who seriously wants an all original car anyways? That's why so many old cars are being pro toured and are even starting to be worth more money. Anyways.. LOL at bish driving like a grandpa. and a POS? LOL... your saying 79 pacecar is better than his vette? LMFAO! what you smoking or drinking? I want some

[03 OW SVT]

any mustang in the late 70s and early 80s are thee ugliest mustangs ever made. They all should be gutted, caged, lsx swapped and raced. Who seriously wants an all original car anyways? That's why so many old cars are being pro toured and are even starting to be worth more money. Anyways.. LOL at bish driving like a grandpa. and a POS? LOL... your saying 79 pacecar is better than his vette? LMFAO! what you smoking or drinking? I want some
74 to 77 were the ugly years. Those were the year Mustangs I choose to forget about.

[went9s]

I truly hate this Forum.... what a waste.

GTFO.:wave:
Marks a dick.<---Has no friends and i would've drove his cobalt in the 12's
Grecco is gay with torqueboxer and ruined a rare notch.

[went9s]

74 to 77 were the ugly years. Those were the year Mustangs I choose to forget about.

I agree

[vitaleffects626]

Wtf ???

[Cam99]

Lotta butthurtery on here... is that even a word??

.....

[blksunshine88]

Adam me and Ben got hooked up because u stood me up last Friday for our date I forgive u how bout a 3way

Sent from my SCH-I405 using Tapatalk 2

[Mark Aubele]

GTFO.:wave:
Marks a dick.<---Has no friends and i would've drove his cobalt in the 12's
Grecco is gay with torqueboxer and ruined a rare notch.

Easily in the 12s at 5'2" 113 lbs

[PaxtonShelby]

LOL Cam!!

[blksunshine88]

X2 Cam cracking me up

Sent from my SCH-I405 using Tapatalk 2

[blksunshine88]

GTFO.:wave:
Marks a dick.<---Has no friends and i would've drove his cobalt in the 12's
Grecco is gay with torqueboxer and ruined a rare notch.
Still waiting for u to chime in here Ben lol

Sent from my SCH-I405 using Tapatalk 2

[yeahloh95]

i put a catch can on my car and spun the tires.....

[PaceFever79]

Mark, normally I would just ignore you, but I'm feeling a little bit edgy.

My high school buddy died Sunday from a brain aneurysm.

[torqueboxer]

This is almost as epic as the "tire-shined my car pics" thread we started awhile back. Dude really said he wants mark to stuff it in a wall? How bout type in " ugly 79 mustang " into yahoo images, check out the only vehicle to appear 3 times.

[Mark Aubele]

Mark, normally I would just ignore you, but I'm feeling a little bit edgy.

My high school buddy died Sunday from a brain aneurysm.

I am truly sorry about your friend and do not wish that pain on anyone, but if you read back a few pages you kind of started this whole thing.

[Pure Stock]

i put a catch can on my car and spun the tires.....

Nice. I worked on my coyote today. I re-checked the valve stem caps, reset the mpg calculator and hopped it a little.

[PaceFever79]

I am truly sorry about your friend and do not wish that pain on anyone, but if you read back a few pages you kind of started this whole thing.

Alright, well, now I'm ending it.

Thanks for your condolences. He was 51.

[blksunshine88]

You have my sympathy, sorry for your loss

Sent from my SCH-I405 using Tapatalk 2

[PaceFever79]

Thanks, I appreciate the condolences. My head is messed up.

I had to explain that, but I dislike the drama, so let's get back to Mustangs.

Mark, let's bury the hatchet?

Truth is, I'm jealous as hell, but sad for the car...

Good luck racing, stay safe, show em what a privateer can do! :awsome: