finally got a good pass

[pwtmxracing]

took my car thursday night and finally got a nine second pass car went 9.58 at 130 cant wait till the true street race ...lou i emailed u a video of the pass was wondering if u coul put it up for me thanks bob.:goodidea:

[pRojekt02GT]

took my car thursday night and finally got a nine second pass car went 9.58 at 130 cant wait till the true street race ...lou i emailed u a video of the pass was wondering if u coul put it up for me thanks bob.:goodidea:

Congrats dude, thats pretty fast!! :highfive:

[biminiLX]

took my car thursday night and finally got a nine second pass car went 9.58 at 130 cant wait till the true street race ...lou i emailed u a video of the pass was wondering if u coul put it up for me thanks bob.:goodidea:
Very nice, so what'll it run when you run it all aout? :sticktonge:
-J

[Sonic03snake]

Here you go, Bob. I take it the new carb worked out for you.:goodidea:

YouTube- bob martrays 9 pass.mov

[Martin0660]

Very Nice ... not sure how I missed it there ....

[Black Vert]

Nice, but the mph looks low. Whats youre 60' and 1/8 ?

[scott5]

nice pass bob.. I am definetly glad i stuck around to see it.. Seemed like everyone was getting faster as the night went on.

[pwtmxracing]

Here you go, Bob. I take it the new carb worked out for you.:goodidea:

YouTube- bob martrays 9 pass.mov (http://www.youtube.com/watch?v=0rwjAck9_J4)
thanks lou ur the man

[pwtmxracing]

Nice, but the mph looks low. Whats youre 60' and 1/8 ?
1.5 and 6.1

[pwtmxracing]

Very nice, so what'll it run when you run it all aout? :sticktonge:
-J
9.4 lol

[pwtmxracing]

nice pass bob.. I am definetly glad i stuck around to see it.. Seemed like everyone was getting faster as the night went on.thanks :goodidea:

[Black Vert]

Did you lift before the traps?

[biminiLX]

1.5 and 6.1
Very nice, on a 1.59 60' and 6.1 1/8 I went 9.60 @ 148.

What's the combo? 331 turbo and car in sig, sounds sweet.:goodidea:
-J

[pwtmxracing]

Did you lift before the traps?
yeah i lifted twice

[pwtmxracing]

Very nice, on a 1.59 60' and 6.1 1/8 I went 9.60 @ 148.

What's the combo? 331 turbo and car in sig, sounds sweet.:goodidea:
-J
its a 363 with a power adder solutions 91mm

[biminiLX]

Any pics? Would love to see.
-J

[yeahloh95]

very nice looking car i saw it going up on trailer but missed that pass some how

[pwtmxracing]

very nice looking car i saw it going up on trailer but missed that pass some how
thanks

[pwtmxracing]

:goodidea:
Any pics? Would love to see.
-J
i will try and work on that i dont have any pics of the new set up

[scott5]

You going after harrer now for that plate? Lol

[TooFast98Cobra]

did you deal with Chris at PAS?

[Mater]

I still beat u!

[pwtmxracing]

You going after harrer now for that plate? Lol
idk he got thoes dirt track tires i ant messin with him...:biglaugh:

[pwtmxracing]

did you deal with Chris at PAS?yeah he sold me my blow off valvesorry about that i bought the turbo off of forced inductions they had alot of input on my set up..

[pwtmxracing]

I still beat u!yes u did it it was a good one too :laughing:

[pwtmxracing]

well went back lastnight and found out i need a converter i was blowing through it in high gear by the 1/8 mile . if it aint one thing its another

[went9s]

Did you find out about Larrys converter?

[pwtmxracing]

no not yet

[pwtmxracing]

well it went a little faster today 9.33 at 156 with a 1.57 60 foot. still working the bugs out and i cant get my datalogger working right i am starting to hate altronics.

[biminiLX]

Wow, big congrats that is great!
How much boost? and what is the full combo?
Would love to see more pics, the vid before looks sweet!
-J

[pwtmxracing]

it is a 363 with a powerglide 4500 stall 355 gears. pro topline heads cam motion custom cam homemade hotside garrett 91mm air to air intercooler csu 950 blowthrough. i dont have any numbers cause that damn data logger wont work for shit. i need a wastegate bad i only have a 38mm on it right now so it creeps pretty bad i have a tire guage the one u have to push the little button to clear the pressure reading plumbed into the intake in the car and it has been as high as 25 pounds but it only shows the highest spike so its hard to tell what the hell is going on.

[biminiLX]

Very nice, and yes that WG is tiny, I run a single 60mm with the 88mm Garrett.
What A/R and how much boost?
Would love to see it one of these days.
-J

[pwtmxracing]

Very nice, and yes that WG is tiny, I run a single 60mm with the 88mm Garrett.
What A/R and how much boost?
Would love to see it one of these days.
-J
the ar is 108 and im not sure as to howmuch boost on that pass my o2 alert is not datalogging boost and my air fuel ratios

[redneck racing]

the ar is 108 and im not sure as to howmuch boost on that pass my o2 alert is not datalogging boost and my air fuel ratios

EFI EFI EFI EFI


it is a 363 with a powerglide 4500 stall 355 gears. pro topline heads cam motion custom cam homemade hotside garrett 91mm air to air intercooler csu 950 blowthrough. i dont have any numbers cause that damn data logger wont work for shit. i need a wastegate bad i only have a 38mm on it right now so it creeps pretty bad i have a tire guage the one u have to push the little button to clear the pressure reading plumbed into the intake in the car and it has been as high as 25 pounds but it only shows the highest spike so its hard to tell what the hell is going on.


EFI EFI EFI EFI EFI

Just joking bob, i just about crashed the truck when dan told me your MPH!

[Mater]

Nice Bob!!!

EFI EFI EFI EFI EFI EFI EFI EFI EFI EFI
EFI EFI EFI EFI EFI EFI EFI EFI EFI EFI

EFI EFI EFI EFI EFI EFI EFI EFI EFI EFI

[pwtmxracing]

i just threw up in my mouth !

[billyNOTnice]

lol 9.33 at 156.... I was gonna say 9.56 at only 130 is getting shit done...

[SoLow]

congrats bob

[biminiLX]

Anyone got a vid from this weekend?
You easily got 8s mph, just need to work on the 60'
Car is impressive.
-J

[Black Vert]

well it went a little faster today 9.33 at 156 with a 1.57 60 foot. still working the bugs out and i cant get my datalogger working right i am starting to hate altronics.

Nice looking car, that thing moves! Sounds badass going down the track, all you can hear is that turbo spooling :goodidea: Is it still pushing water out?

[Black Vert]

Anyone got a vid from this weekend?
You easily got 8s mph, just need to work on the 60'
Car is impressive.
-J

I got a vid on my phone of his car, but its a typical crappy cell phone vid.

[biminiLX]

Did you run Chad?
Either of you guys running this weekend?
I'm still trying to make it out to watch and wanted to see the turbo Foxes :).
-J

[Black Vert]

Yea I was there, got 4 runs in, only 1 decent pass. My new converter is too tight, could only get to 2200 rpm footbraking, any more and it would push me through the beams. Couldnt build any boost on the line and 60ft suffered. But it did pick up 7 mph on the big end. I think Im done for the year, they were bustin my balls about going too fast without proper safety equipment, which is understandable, so Im workin on that this winter.

[pwtmxracing]

Nice looking car, that thing moves! Sounds badass going down the track, all you can hear is that turbo spooling :goodidea: Is it still pushing water out?
yean it pushed out some but i may have figured out my problem.. i torqued the heads to 7/16 head stud specs and i have 1/2 inch studs they are at 85 and need to b 110 so i am hoping that is the problem:pinkthumb:and thanks for the compliments.

[pwtmxracing]

Did you run Chad?
Either of you guys running this weekend?
I'm still trying to make it out to watch and wanted to see the turbo Foxes :).
-J
if all goes well i think i am going

[pwtmxracing]

congrats bob
thanks guffy when u ready to ride shotgun:goodidea:

[redneck racing]

thanks guffy when u ready to ride shotgun:goodidea:


That sounds like a date!!